Basic machine composed of 4 clamps diameter 160mm / 6" in light weight alloy, on which the third clamp is easily adjusted in order to weld special pieces. The basic machine includes as well an automatic disconnecting device, highly suited to detach the pipes from the heating mirror at the end of the heating time.
	Removable PTFE or Silverstone coated heating mirror with electronic thermostat and separate thermometer in order to continuously check the heating mirror's temperature (weight 6Kg, 230V 50Hz 1.0KW/ other voltages on specific request).
	Removable electric facing tool supplied complete with: central location of drill engine together with worm gearing guarantee a minimum of maintenance to the tool double cutting edge blades safety micro switch allowing the engine to start only when in operating position mechanical block device to avoid the possibility of facing device coming out during operation weight 9Kg., 230V 50Hz 0.72KW / other voltages on specific request
	Support for facing tool and heating mirror suitable to carry the two parts, and to place them when not in use
	Double acting electro hydraulic unit complete with: pressure gauge (d. 100mm / 4", scale 0 - 100 Bar) pressure accumulator, to maintain pressure when engine off continuous pressure regulation using valve flexible hoses with quick couplings protection and transport frame complete with handles weight 24Kg, 230V 50Hz 0.37KW / other voltages on specific request
	light weight reducing rings (8 inserts per set including 6 wide inserts for pipe and 2 narrow inserts for fittings), d. 40, 50, 63, 75, 90, 110, 125, 140mm / inch series on request (weight 17Kg.). Diameters of rings required are to be specified at time of order.
	Upper fitting clamp d. 160mm for short spigot fittings
	Stub device range 40 - 160mm / 1 1/4" - 6" (weight 4Kg)

Back to : Field Machines