PL 630 C, PL 630 CNC
Range 315 to 630mm pipes and bends, 315 to 630mm tees and crosses on request
Hydraulically operated, computer controlled shop machines with printer for recording all parameters relative to the butt welding of pipe and fittings in PE, PP and other thermoplastic materials. Pivoting clamps allow for the fabrication of segmented bends of different radii. Upon request, these machines can be supplied special jigs for the fabrication of Tees and 90' Crosses, as well as 45' and 60' laterals.
| PL 630 General Data |
| Welding range | 315 - 630 / 12" = 24" |
| Segmented bends range | 315 - 630 / 12" = 24" |
| 90' tees and crosses range | 315 - 630 / 12" = 24" |
| 45' and 60' tees range | 315 - 630 / 12" = 24" |
| PN weldable | PN 2.5 - PN 25 |
| Voltage | 400V 50Hz (standard) |
| Power | 23Kw - 35 Ampere |
| PL 630 C Machine Composition |
| Standard version supplied with: |
3600 Kg |
| Basic machine complete with motor, electric and hydraulic circuits and control board | |
| Two pivoting clamps d. 630mm / 24" with hydraulic opening and blocking | |
| Reduction inserts for the pivoting clamps d. 315, 355, 400, 450, 500, 560mm (inch series on request) | |
| Electric mill cutter with reducing gear operated by the control board | |
| PTFE coated heating mirror with electronic thermostat operated by the control board |
| PL 630 CNC Machine Composition |
| Standard version supplied with: |
3650 Kg |
| Basic machine complete with motor, electric and hydraulic circuits, control board complete with CNC and printer | |
| Two pivoting clamps d. 630mm / 24" with hydraulic opening and blocking | |
| Reduction inserts for the pivoting clamps d. 315, 355, 400, 450, 500, 560mm (inch series on request) | |
| Electric mill cutter with reducing gear operated by the control board | |
| PTFE coated heating mirror with electronic thermostat operated by the control board |
| Accessories on Request | Kg |
| Right fittings clamp d. 630mm / 24" | 110 |
| Left fittings clamp d. 630mm / 24" | 110 |
| Reducing rings for right and/or left hand fittings clamps d. 315, 355, 400, 450, 500, 560mm (inch series on request) | 45 |
| Stub ends device d. 315 - 630mm / 12" - 24" | 82 |
| 90' tees device d. 630mm / 24" | 975 |
| Reducing rings for 90' tees device d. 315, 355, 400, 450, 500, 560mm (inch series on request) | 300 |
| Crosses device d. 630mm / 24" | 1300 |
| Additional reducing rings for crosses d. 315, 355, 400, 450, 500, 560mm (inch series on request) | 400 |
| 45' and 60' tees device d. 630mm / 24" | 600 |
| Reducing rings for 45' and 60' tees device d. 315, 355, 400, 450, 500, 560mm (inch series on request) | 240 |
Back to : PL Range of Bend & Tee Machines
For more information, delivery and price, please contact us
