PL 500, PL 500 CNC Workshop Machines
Range 250 to 500mm pipes and bends, 250 to 400mm tees and crosses
| PL 500C | PL 500 CNC |
|
|
  |
Hydraulically operated workshop butt welding machines for PE, PP and PVDF pipes and fittings. The pivoting clamps allow the machine to fabricate segmented bends in different radii.
These machines are completely hydraulically operated, with the controls on the front of the machine.
Welding from PN 2.5 to PN 16 pipes and fittings is accommodated.
These machines cam be supplied (on request) with tee device for the fabrication of 90' tees. Also on request, these machines are supplied with CNC control and printer in order to have the printed parameters relative to each weld done, according to DVS and other standard parameters.
|
PL 500 General Data |
| Welding range | 250 - 500mm /10" - 20" |
| Segmented bends range | 250 - 500mm / 10" - 20" |
| 90' tee and cross range | 250 - 400mm / 10" - 16" |
| 45' and 60' tee range | 250 - 400mm / 10" - 16" |
| PN weldable | PN 2.5 - PN 25 |
| Voltage | 400V 50Hz (other on request) |
| Power | 11Kw - 20 Amperes |
PL 500 C
| Standard version supplied with: |
1000Kg |
| Basic machine complete with motor, hydraulic circuits, control board | |
| Two pivoting clamps d. 500mm / 20" | |
| Reduction inserts for the pivoting clamps d. 250, 280, 315, 355, 400, 450mm (inch series on request) | |
| Electric mill cutter with reducing gear and safety micro switch | |
| PTFE coated heating mirror with electronic thermostat |
PL 500 CNC
| Standard version supplied with: |
1100Kg |
| Basic machine complete with motor, hydraulic circuits, control board complete with CNC and printer | |
| Two pivoting clamps dia. 500mm / 20" | |
| Reduction inserts for the pivoting clamps dia. 250, 280, 315, 355, 400, 450mm (inch series on request) | |
| Electric mill cutter with reducing gear and safety micro switch | |
| PTFE coated heating mirror with electronic thermostat |
PL 500 Accessories on Request
| Right fittings clamp d. 500mm / 20" | 85 |
| Left fittings clamp d. 500mm / 20" | 85 |
| Reducing rings for right and/or left fittings clamps d. 250, 280, 315, 355, 400, 450mm (inch series on request) | 30 |
| Stub end device d. 250 - 500mm / 10" - 20" | 54 |
| 90' tee device d. 400mm / 16" | 210 |
| Reducing rings for 90' tee device d. 250, 280, 315, 355mm (inch series on request) | 180 |
| Crosses device d. 400mm / 16" | 280 |
| Additional reducing rings for crosses device d. 250, 280, 315, 355mm (inch series on request) | 240 |
| 45' and 60' tees device d. 400mm / 16" | 162 |
| Reducing rings for 45' and 60' tees device d. 250, 280, 315, 355mm (inch series on request) | 206 |
| Transport packaging | 185 |
Back to : PL Range of Bend & Tee Machines
For more information, delivery and price, please contact us
