PL 315, PL 315 CNC Workshop Machines
Range 90 to 315mm pipes and bends, 90 to 250mm tees and crosses
|
PL 315C |
PL 315-CNC | |
|
|
 |
|
|
|
|
Hydraulically operated workshop butt welding machines for PE, PP and PVDF pipes and fittings. The pivoting clamps allow the machine to fabricate segmented bends in different radius.
These machines are completely hydraulically operated, with the controls on the front of the machine.
Welding from PN 2.5 to PN 16 pipes and fittings is accommodated.
These machines can be supplied (on request) with tee device for the fabrication of 90' tees. Also on request, these machines are supplied with CNC control and printer in order to have the printed parameters relative to each weld done, according to DVS and other standard parameters.
PL 315 / PL 315 CNC / PL 315 C-CNC
General Data
| Welding Range | 90mm - 315mm / 3" - 12" |
| Segmented Bend Range | 90mm - 315mm / 3" - 12" |
| 90' Tee and Cross Range | 90mm - 250mm / 3" - 10" |
| 45' and 60' Junction Range | 90mm - 250mm / 3" - 10" |
| PN | PN 2.5 - PN 25 |
| Voltage | 230V 50Hz (standard) |
| Power | 5.5Kw - 30 Ampere |
Machine Composition
| PL 315 C supplied with: | |
| Basic machine complete with motor electric and hydraulic circuits | |
| Two pivoting clamps d. 315mm | |
| Reducing inserts for the pivoting clamps d. 90, 110, 125. 140, 160, 180 ,200, 225, 250, 280mm (inch series on request) | |
| Electric mill cutter with reducing gear and safety micro switch | |
| PTFE coated heating mirror with electronic thermostat | |
| PL 315 CNC supplied with: | |
| Basic machine complete with motor electric and hydraulic circuits, control board complete with CNC and printer | |
| Two pivoting clamps d. 315mm | |
| Reducing inserts for the pivoting clamps d. 90, 110, 125. 140, 160, 180 ,200, 225, 250, 280mm (inch series on request) | |
| Electric mill cutter with reducing gear and safety micro switch | |
| PTFE coated heating mirror with electronic thermostat | |
|
Accessories on request: |
|
| Right fittings clamp d. 315mm / 12" | 18 |
| Left fittings clamp d. 315mm / 12" | 18 |
| Reducing rings for right and/or left fittings clamps d. 90, 110, 125, 140, 160, 180, 200, 225, 250, 280mm (inch series on request) | 25 |
| Stub end device 90 - 315mm / 3" - 12" | 28 |
| 90' tee and cross device d. 250mm / 10" | 38 |
| Reducing rings for 90' tee device d. 90, 110, 125, 140, 160, 180, 200, 225mm (inch series on request) | 30 |
| Additional reducing rings for fabrication of crosses d. 90, 110, 125, 140, 160, 180, 200, 225mm (inch series on request) | 10 |
| 45' and 60' tee (equal branch) device d. 250mm / 10" | 30 |
| Reducing rings for 45' and 60' tee device d. 90, 110, 125, 140, 160, 180, 200, 225mm (inch series on request) | 62 |
| Packaging on pallet | 31 |
Back to : PL Range of Bend & Tee Machines
For more information, delivery and price, please contact us
